As long as its rated for 30 amps, there is no maximum distance. The question should not be how many feet, but how many cords. For example, two 50 foot, 30 Amp extension cords should be considered to have less capacity than one 100 foot extension cord.
How long can my RV power cord be?
RV Cords are 25 feet in length. As long as someone sticks with the cord that came with the RV and one 25 foot extension, they will never exceed the 50 amp rating.
How far can you run 10 gauge wire for 30 amps?
How far can 10 gauge wire carry 30 amps? 30 amps carried over a 10 gauge wire is not meant to be run over far distances. If you plan on going over 150 feet, you should upgrade the wire size from 10 gauge to 8 gauge.
How far can you run a heavy duty extension cord?
In general, extension cords should not exceed 100 feet in length. However, by plugging one extension cord into another, the maximum cord length can be easily exceeded. If the job requires more than a 100-foot distance, a temporary power distribution box is required.
How far can I run a 50 amp extension cord?
Re: Acceptable length of 50 amp extension cord About $1.17/ft plus shipping. You will need a 50 amp breaker at the house end and a panel and a 50 amp breaker at the RV end plus then 50 amp RV receptacle. 6/3 with Ground copper UF-B cable runs about $4.00/ft. This is OK for 100 ft.
How far can you run 12 gauge extension cord?
12-Gauge Cords: If your tool load is between 10 and 15 amps and the length of the cord is 50 to 100 feet, you need a 12-gauge cord to safely power any tool. This is a great extension cord for many purposes.
How many amps can a 10 gauge extension cord handle?
12 Gauge for 14-15 Amps. 10 Gauge for 16-20 Amps.
Can you connect two 50 amp RV cords together?
If you have two 50 amp shore power cords, a 50 amp 4-prong generator adapter can be used to connect the two cords together. Thats a different twist lock configuration- I dont know the NEMA number off the top of my head, but the RV inlet has 3 blades plus the shell as a ground.
How far can you run 10 gauge wire?
How Far Can You Run 10 Gauge Wire? You can run a 10 gauge wire up to 85 feet on a 20 amp circuit. If you opt to use this type of wire on a 15 amp circuit, it can run up to 115 feet. After these distances, the circuit will go over the recommended 3% voltage drop.
Can 10 gauge wire handle 20 amps?
Yes, you can use 10 AWG copper conductors with a 20 ampere breaker. The smallest size conductors you could use with a 20 ampere breaker, are 12 AWG copper conductors. Theres no problem using larger conductors, other than cost to you, and difficulties associated with working with thicker conductors.
Can an extension cord handle 30 amps?
Be sure the extension cord is fully seated into the socket before you connect anything to it; however, never force an extension cord into a socket where it does not fit. The best extension cords for smaller RVs are usually 30 amps while larger ones can require 50 amps.
Is a 10 amp extension cord enough?
16-Gauge Cords: Any 16-gauge cord between 0 and 100 feet long will adequately handle tool loads up to 10 amps. 12-Gauge Cords: If your tool load is between 10 and 15 amps and the length of the cord is 50 to 100 feet, you need a 12-gauge cord to safely power any tool. This is a great extension cord for many purposes.