For your propane tank with fill valve, you most likely need the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333. This will have the 1/4 inch NPt inlet and the 3/8 NPT outlet and will maintain a constant 11 inch water column propane pressure for your vent-less heater.

Does a 100lb propane tank need a regulator?

Re: Using 100 pound propane tank with 20 pound tank regulator. Rubber hose (rated for gas and pressure), barb fitting and a hose clamp will work just fine as long as there are no leaks and a regulator is involved.

What is the PSI of a 100 lb propane tank?

172 PSIG LPG gas cylinder-bottle pressure all depends on the temperature. At 100°F, a 100 lb propane tank has 172 PSIG of pressure.

How do you size a propane regulator?

0:101:51Tech Tips: Sizing a Gas Regulator - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe following information is required your inlet pressure your regulated outlet pressure yourMoreThe following information is required your inlet pressure your regulated outlet pressure your capacity in BTUs or cubic feet per hour. The type of gas that will be flowing through the regulator.

How many hours does a 100 lb propane tank last?

Examples. At a consumption rate of 26,000 BTU per hour, your 100-pound bottle will fuel your propane fireplace for about 84 hours, equivalent to 3.5 days of continuous 24/7 operation.

Can you overfill a 1 lb propane tank?

They actually fill easier if theres a bit left in them. Put the 1 lb bottle in the freezer for 20 minutes and then follow the instructions. A full cylinder should weigh 30 oz. Do not overfill and do not mess with the relief valve to burp them, thats a major cause of leakers.

How many PSI is a propane regulator?

The propane barbecue can use a high-pressure propane delivery system, which requires a high-pressure regulator. This can vary from between 10 and 60 psi (the pressure measurement).