An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.
How does a hook switch work?
An electronic hook switch (EHS) is a device which electronically connects a wireless headset and phone. Users can handle calls with the headset only, freeing them from remaining next to the phone. Switching from handset to headset is typically accomplished by pushing a specific button.
What is an EHS Adaptor?
Electronic Hookswitch (EHS) adapters provide a ring alert signal to your headset anytime your deskphone rings. It also allows you to answer and end calls right from your headset anywhere within your headsets range. EHS adapters eliminate the need for an HL10 handset lifter.
What is a telephone Switchhook?
A telephone hook or switchhook is an electrical switch which indicates when the phone is hung up, often with a lever or magnetic button inside the cradle or base where a telephone handset resides. When the handset is off the cradle, the telephone is said to be off-hook, or unable to receive any (further) calls.
How does an EHS cable work?
It is very simple. It uses adhesive tape to stick to the side of your phone, and it works on most telephones, even very basic phones. When you push a button on the headset, it lifts a flap, and that flap lifts your handset up, and it simulates you taking a call.
Button hooks are an easy to use dressing aid that lets you button buttons with one hand. Thread the hook end through the buttonhole, then hook the button. Pull the hook back through the buttonhole and the button will follow. Its that simple!
What is E hook headset?
Prerequisites. An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.
What is a headset lifter used for?
A wireless headset lifter is a device that allows you to take phone calls while away from your desk. This device provides a world of convenience to those using office wireless headsets.
How does the Plantronics HL10 handset lifter work?
1:282:46Plantronics HL10 Handset Lifter Setup Guide for Wireless - YouTubeYouTube
When telephone is on hook then it acts as open circuit?
The term on-hook has the following meanings: The condition that exists when a telephone or other user instrument is not in use, i.e., when idle waiting for a call. Note: on-hook originally referred to the storage of an idle telephone receiver, i.e., separate earpiece, on a switchhook.
What is an advantage of electronic hook switch adapters?
The Plantronics Electronic Hook Switch (EHS) cable is an add on cable for Plantronics wireless headsets that enables remote answer of phone calls away from the desk. With the Plantronics EHS cables, users can answer a call even if theyre not at their desk.
What does it mean to hook a fax?
The hook button is used to hang up the line, other times it is used (as a quick press) to switch to a call waiting on the same line. It is more commonly used to open a line for a dial tone. When you press the hook button, the fax machine simulates taking a phone handset off the phone line.
What does start off hook mean?
It simply indicates that a telephone receiver is off the hook (the handset is lifted) and the telephone line is open.
What is headset Hookswitch control?
This is a feature that allows users to remotely receive ring indication, adjust the volume, and to answer calls, end calls, and mute calls using a wireless headset. By default, the wireless headset remote hookswitch control feature is disabled.
How do I enable headset Hookswitch control on my Cisco phone?
Access the server administrator with a browser. Select Device > Phone through the drop down menus. Open the desired phone. Scroll down to Wireless Headset Hookswitch Control, set to Enabled, Click Apply.
How do you hook up a HL10 lifter?
0:352:46Plantronics HL10 Handset Lifter Setup Guide for Wireless - YouTubeYouTube
How do I get my Plantronics headset to ring?
To ring through the headset and PC:Go to Start > All Programs > Plantronics > PerSono Suite.Click Dongle.From the Ring both Headset and PC drop-down list, select On. The sound will then ring in the headset and the PC speakers.May 15, 2021
How do you set up a Plantronics HL10 lifter?
0:352:46Plantronics HL10 Handset Lifter Setup Guide for Wireless Headsets YouTube
What is a lifter for a wireless headset?
A lifter is a device that attaches to your phone handset. It is like a robot that will physically lift up the phone handset to answer calls and also hang the up just like a person has to.
What is on hook condition?
The term on-hook has the following meanings: The condition that exists when a telephone or other user instrument is not in use, i.e., when idle waiting for a call. Note: on-hook originally referred to the storage of an idle telephone receiver, i.e., separate earpiece, on a switchhook.
What happens if you leave a phone off the hook?
Leaving the telephone off the hook is a common problem for people with Alzheimers, dementia, or any form of cognitive loss. At the very least it can be a nuisance, however it can also potentially be dangerous as relatives & friends may not be able to contact the individual.